VisiTrace RS485 120 L1

Part # 10140043-1111

The VisiTrace RS485 L1 sensor delivers reliable dissolved oxygen measurements in the low ppb range. This sensor ensures accurate monitoring during filtration, filling, and boiler feed water applications, especially in breweries and power plants.

Receive More Information

Minimum: 1, Maximum: 1000

VisiTrace RS485 L1 Details

VisiTrace RS485 is an optical dissolved oxygen (DO) sensor specifically designed for reliable trace-level oxygen monitoring in brewery and power plant applications. Building on Hamilton's proven optical DO sensor technology, VisiTrace RS485 delivers accurate and stable dissolved oxygen measurements from 0.8 to 2000 ppb, enabling precise monitoring during critical process steps such as filtration, filling, and boiler feedwater analysis.

The sensor is delivered ready to use without the need for polarization, enabling rapid startup and immediate measurement availability. Compared to conventional amperometric dissolved oxygen sensors, VisiTrace RS485 provides flow-independent measurements, fast response times, and requires significantly less maintenance.

VisiTrace RS485 incorporates Hamilton's Arc intelligent sensor technology with an integrated transmitter, enabling direct digital communication and simplified system integration. The sensor communicates via Modbus RS485 RTU for seamless integration into process control systems. The optional Arc Wi Pivot BT enables wireless communication for convenient sensor access, configuration, and monitoring.

The replaceable ODO Cap simplifies maintenance and sensor servicing. The specially developed ODO Cap L1 is designed for trace-level dissolved oxygen measurements and provides resistance against standard disinfectant solutions containing active chlorine and chlorine dioxide. This design enhances durability and ensures reliable long-term operation in demanding brewery and power plant environments.

Combining reliable trace-level measurement performance, low-maintenance operation, and advanced optical sensing technology, VisiTrace RS485 provides a robust solution for long-term dissolved oxygen monitoring in applications where even very low oxygen concentrations are critical.

Common applications Pharma & Biopharma, Bioprocess Upstream, Water, Energy, & Environment, Power Generation, Agri-Food and Beverage

Bypass costly external transmitters and potential signal noise using Intelligent Sensors.

Wireless communications for calibration, configuration, and maintenance.

Several Sensor Cap designs to suit your installation.

Dissolved Oxygen Sensor for Brewing

  • Ideal for dissolved oxygen measurement in breweries
  • Accurately measures dissolved oxygen down to 0.8 ppb
  • Ensure quality control at every stage in beverage production and more

Resistant to Disinfectants

  • The specialized ODO Cap L1 on this high-accuracy dissolved oxygen sensor withstands active chlorine and chlorine dioxide
  • Protects against sensor degradation and extends the dissolved oxygen probe lifespan
     

Intelligent Sensors

  • An integrated microprocessor eliminates the need for costly external transmitters
  • Sensor output options include nA, 4 - 20 mA, and digital protocols.
     

Bluetooth Sensor Management

With the optional Arc Wi adapter, VisiTrace RS485 can have wireless communication, allowing seamless integration with ArcAir software for easy calibration, configuration, and maintenance.

  • The measurement technology from Hamilton is hard to beat in terms of its measurement accuracy and reliability.

    The measurement technology from Hamilton that is used in our brewery is hard to beat in terms of its measurement accuracy and reliability. The planning security and cost stability with the subscription is very attractive and important to us. Hamilton offers great support and is always open to customer requests.

    Holger Bruckes
    Deputy head of Quality Assurance Mönchengladbach Brewery, Branch of OETTINGER Brewery GmbH

  • The sensors allowed us to improve the end product.

    We have high quality standards and are convinced that Hamilton is able to meet them with its oxygen sensors. We use the oxygen sensors throughout the entire area of ​​beer production and bottling. The sensors allowed us to improve the end product. Hamilton's support is excellent at all times.

    Marco Punke
    Team leader for technology and QM/UM, Princely Fürstenbergische Brewery GmbH & Co. KG

  • I could not be more pleased with my experience with Hamilton!

    My company has been using Hamilton probes for years and have always been happy with their performance! The team is always very helpful in trouble shooting issues and answering any questions that we may have about our probes. Overall, I could not be more pleased with my experience with Hamilton!

    Abigail Mann
    Bioprocessing Fermentation Associate at Heliae Development

VisiTrace RS485 120 L1 Specifications

Print
Process Connection PG13,5
Sensor Family VisiTrace RS485
Wetted Parts Stainless Steel 1.4435
EPDM (Ethylene propylene elastomer)
VMQ (Silicone elastomer)
See compliance details in Material Specification document
Electrical Connector VP8
Parameter DO (Optical)
Sensor Output Arc: Modbus, 4-20 mA (only via Arc Wi 2G Adapater)
Measuring Range At 25°C and 1013 mbar total gas pressure
0.8 ppb to 2000 ppb (in liquid)
20 ppm to 49'000 ppm (in gas)
0.02 to 50 mbar(pO2)
Electrolyte None
Accuracy at 25 °C ± 0.5 ppb or 2 % whichever is greater
Drift at Room Temperature < 1 % per week @ 100 ppb
Sensor Cap ODO Cap L1
Oxygen Consumption None
Temperature Sensor NTC 22 kOhm
Configurable Values DO: mbar; %-sat; %-vol; µg/l; mg/l; ppb/ppm (dissolved oxygen); Temperature: °C, °F, K
Surface Quality of Steel Ra < 0.4 µm (N5)
Digital Interface RS485 Modbus (max. 32 addresses)
Baud Rate 4800, 9600, 19200, 38400, 57600, 115200 Bd
Operating Voltage 10 to 27 VDC max. 1.5 W
Serial Number Yes
Response Time t90% < 20 s in gas; < 90 s in water
Certificate Yes
ATEX Approval No
IECEx Approval No
Diameter 12 mm
Autoclavable Yes
Steam Sterilizable Yes, max. Temperature 140 °C
CIP Yes
Operating Temperature Range -20 to 140 °C; the sensor provides no DO reading above 85 °C
Pressure Range bar g -1 to 12 bar
Protection Rating IP68
Required Flow None
a-length 120 mm

VisiTrace Sensor Compatibility with Hamilton Devices

Explore the limitless possibilities of Hamilton products.

VisiTrace RS485 120 L1 Resources

Browse app notes, user guides, specification documents, and more in our Knowledge Center.

Browse app notes, user guides, specification documents, and more in our Knowledge Center.

Browse app notes, user guides, specification documents, and more in our Knowledge Center.

Green circle icon with a dark navy lightbulb containing two interlocking gears, on a teal dotted background.

Article

Bilinear Analog Outputs with Arc Sensors

Bilinear analog (4 to 20mA) outputs are a feature in Arc sensors but are often not well understood. This article provides a brief description of these outputs along with some examples where they can be used.
Green circle icon with a dark navy lightbulb containing two interlocking gears, on a teal dotted background.

Article

Glossary of Sensor & Biopharma Acronyms & Abbreviations

Acronyms and abbreviations are commonly used with process analytics measurements found in the biopharma industry. This glossary is an attempt to de-code some of the more frequently used acronyms.
Green circle icon with a dark navy lightbulb containing two interlocking gears, on a teal dotted background.

Article

Modbus Communication Basics for Arc Intelligent Sensors

This simple primer article discusses the basic setup of Modbus for Arc intelligent sensors and VisiFerm ECS DO sensors.

Browse app notes, user guides, specification documents, and more in our Knowledge Center.

Two overlapping green speech bubbles with a question mark on a dark navy circular background

FAQ

Does salinity impact my DO measurement?

Yes, salinity of a solution generally has an inverse relationship to the dissolved oxygen content within the solution. Arc sensors can have the salinity value of the liquid added in to correct the measurement by using ArcAir.
Two overlapping green speech bubbles with a question mark on a dark navy circular background

FAQ

Can I use a VisiFerm, VisiPro, or VisiTrace for gas phase oxygen measurements?

Yes. Optical DO sensors can be used for monitoring oxygen contents in air as well as dissolved oxygen.
Two overlapping green speech bubbles with a question mark on a dark navy circular background

FAQ

Does atmospheric pressure impact my gas phase oxygen measurement?

Yes, atmospheric pressure directly impacts the partial pressure of oxygen in the measured air and is linearly proportional to the measured oxygen content.
Compare Products
Services
Modular Service Contracts

Hamilton offers modular service contracts tailored to your requirements, featuring a basic module complemented by optional add-ons.

Installation Support

Installation, set-up, and calibration support directly on-site. Our field service team ensures your sensors and cables are installed and functioning correctly.

Qualification IQ/OQ

Support for the qualification of Hamilton equipment including complete documentation. Readying your process for GMP manufacturing activities.

Maintenance and Calibration Services

Preventative maintenance and regular service contracts. Schedule on-site service dates to ensure your sensors are properly maintained and your process is optimized.

On-Site Service Diagnostics

Diagnosing and resolution of process system problems on-site. Finding the root cause and presenting a solution to fit your needs.

On-Site Training

User trainings and on-site trainings for technicians. Tailored training ranging from basic operation to advanced calibration and maintenance.

Application and Technical Support

Hamilton's Technical Support team is here to provide product trouble-shooting, repair, application support, virtual start-up support, and more.

Backed by world-class service and support.

For over 75 years, the Hamilton name has been recognized globally for its unwavering commitment to quality. That pledge extends to creating long-term customer partnerships. We're proud to offer in-depth training courses, on-site field support, custom product builds, and so much more.

Let's Talk

Connect with a Hamilton expert to discuss solutions for your workflow. We are here to enable your success.

Request Type: