EasyFerm Plus PHI Arc 325
Found in these product categories:
Part/REF # 238633-1353
-
Stock status is updated daily. For real-time status, please contact us.
Specifications
| Sensor Family |
Sensor Family
EasyFerm Plus
|
|---|---|
| Parameter |
Parameter
pH
|
| Sensor Output |
Sensor Output
Arc: Modbus, 4 to 20 mA
|
| a-length |
a-length
325 mm
|
| Electrical Connector |
Electrical Connector
VP8
|
| Measurement Principle |
Measurement Principle
Combination electrode; pH potential measured against reference
|
| Measuring Range |
Measuring Range
pH 0 to 14
|
Additional specifications
| Sensitivity |
Sensitivity
57 to 59 mV / pH at 25 °C
|
|---|---|
| Zero Point |
Zero Point
0 ± 20 mV
|
| pH Glass |
pH Glass
Hamilton Type PHI Glass
|
| pH Glass Resistance |
pH Glass Resistance
Moderate
|
| Membrane Shape |
Membrane Shape
Spherical
|
| Diaphragm |
Diaphragm
HP-Coatramic
|
| Number of Diaphragms |
Number of Diaphragms
1
|
| Electrolyte |
Electrolyte
Pressurized Phermlyte
|
| Reference System |
Reference System
Hamilton Everef-F, Silver ion barrier included
|
| Temperature Sensor |
Temperature Sensor
NTC 22 kOhm
|
| Configurable Values |
Configurable Values
pH: pH, mV; Temperature: °C, K, °F
|
| Diameter |
Diameter
12 mm
|
| Process Connection |
Process Connection
PG13,5
|
| Wetted Parts |
Wetted Parts
Glass
EPDM (Ethylene propylene elastomer) |
| Analog Interface 1 |
Analog Interface 1
4 to 20 mA for pH, programmable
|
| Analog Interface 2 |
Analog Interface 2
4 to 20 mA for Temp., programmable
|
| Analog Interface 1 and 2 |
Analog Interface 1 and 2
Galvanically not isolated; pulse width modulation 3.5 kHz
|
| Baud Rate |
Baud Rate
4800, 9600, 19200, 38400, 57600,115200 Bd
|
| Operating Voltage |
Operating Voltage
7 to 30 VDC max. 150 mW
|
| Serial Number |
Serial Number
Yes
|
| Recommended Storage |
Recommended Storage
Hamilton Storage Solution or 3 M KCl
|
| Certificate |
Certificate
Yes, with measured values in Buffer pH 4.01 and pH 7.00
|
| ATEX Approval |
ATEX Approval
No
|
| IECEx Approval |
IECEx Approval
No
|
| Autoclavable |
Autoclavable
Yes, max. Temperature 130 °C
|
| CIP |
CIP
Yes
|
| Steam Sterilizable |
Steam Sterilizable
Yes, max. Temperature 140 °C
|
| Operating Temperature Range |
Operating Temperature Range
Analog interface: 0 to 110 °C; Digital interface: 0 to 140 °C
|
| Sample min Conductivity |
Sample min Conductivity
100 µS/cm
|
| Pressure Range bar g |
Pressure Range bar g
0 to 6 bar
|
Resources
Documents
-
Brochure
-
Catalogs
-
Certificates
- ATEX Certificate BVS 11 ATEX E 038 X - Memosens Sensors (PDF)
- ATEX Certificate TÜV 03 ATEX 7005 X - Analog Sensors and Armatures (PDF)
- BSE / TSE / Jatropha Statement (PDF)
- Certificate - China RoHS Hazardous Substances in Parts (PDF)
- Certificates for Raw Material according the EN 10204-3.1.B
- Declaration of Quality for Calibration Solutions
- EU Declaration of Conformity - Analog Sensors and Armatures (ATEX) (PDF)
- EU Declaration of Conformity - Arc Sensors (PDF)
- EU Declaration of Conformity - Memosens Sensors and Memosens Cables (PDF)
- EU Declaration of Conformity - Memosens Sensors and Memosens Cables (PDF)
- IECEx Certificate - Analog Sensors and Housings (PDF)
- IECEx Certificate BVS 16.0079X - Memosens Sensors (PDF)
- UKCA Declaration of Conformity - Analog Sensors and Armatures (UKEX) (PDF)
-
Flyers
-
Material Specifications
-
SDS
-
Software Downloads
-
Technical Drawings
-
Technical Manuals
-
Technical Note
Related Products
Accessories
-
pH Cleaning Solution Set
A two-part cleaning solution for all glass membrane pH sensors. Also includes storage solution. Glass cleaning Solution B contains material of animal origin. -
DuraCal pH buffer 4.01/7.00/9.21 500 ml
Three buffer set for calibration at common pH levels. Each liquid solution comes with certificate and serves as a Certified Reference Material. -
DuraCal pH buffer 4.01/7.00/10.01 500 ml
Three buffer set for calibration at common pH levels. Each liquid solution comes with certificate and serves as a Certified Reference Material. -
Hamilton Storage Solution 500 mL
Hamilton storage solution is recommended to increase sensor longevity when not in use. -
1 m Cable VP8 / Open End / Power Plug
This cable provides 24VDC power for Arc and VisiFerm ECS sensors. Open leads allow direct wiring to transmitters, PLC and PCS systems. -
1 m Data Cable VP8 / Open End
Data cables are designed for use with Arc sensors to provide 24VDC power and transmit 4-20mA and Modbus output signals - 1 Meter Length. -
3 m Data Cable VP8 / Open End
Data cables are designed for use with Arc sensors to provide 24VDC power and transmit 4-20mA and Modbus output signals - 3 Meter Length. -
5 m Data Cable VP8 / Open End
Data cables are designed for use with Arc sensors to provide 24VDC power and transmit 4-20mA and Modbus output signals - 5 Meter Length.
Additional Accessories
-
10 m Data Cable VP8 / Open End
Data cables are designed for use with Arc sensors to provide 24VDC power and transmit 4-20mA and Modbus output signals - 10 Meter Length. -
15 m Data Cable VP8 / Open End
Data cables are designed for use with Arc sensors to provide 24VDC power and transmit 4-20mA and Modbus output signals - 15 Meter Length. -
20 m Data Cable VP8 / Open End
Data cables are designed for use with Arc sensors to provide 24VDC power and transmit 4-20mA and Modbus output signals - 20 Meter Length.
We're Ready to Help
Hamilton's sales, customer service, and technical support staff are available for questions and additional information about all products and services.
Contact Us