EasyFerm Plus Arc pH sensors combine the accuracy and longevity of pre-pressurized reference technology with Arc Intelligence. Arc sensors offer industry standard 4 - 20mA and Modbus RTU output signals directly from the sensor for connection to the Process Control System. Arc technology complies with the the needs of the pharmaceutical industry with the ability to autoclave, SIP, or CIP clean the sensor.
The listing below provides the most commonly recommended EasyFerm Plus Arc sensors. Looking for a sensor not listed? Click the link to browse the full product offering.
EasyFerm Plus Full Listing
Arc Intelligent Sensor Technology
EasyFerm Plus sensors include the option for Arc intelligent sensor technology within the sensor. The video shows how Arc can save considerable time and cost in all phases of your process.
Connecting to a Traditional Bioreactor?
Taking advantage of the benefits of Arc pH sensors on a traditional bioreactor requires bypassing a controller’s built-in milli-volt sensor input. The introduction of the Arc ECS Adapter simplifies this connection by utilizing the existing bioreactor milli volt input.
Brochure - BioPharmaInnovative solutions for process analytics in biotechnological and pharmaceutical industries.
Brochure - Arc Intelligent SensorsArc Intelligent sensors offer a new way to connect to your process control system.
Guide - pH MeasurementWant to learn more about pH? Look no further than the Hamilton pH measurement guide. This download provides a comprehensive overview of how these sensors work, calibration, handling, and storage.
How do I communicate with an Arc sensor?
What is the expected lifetime of my pH sensor?Expected pH sensor lifetime is dependent on the application. Exposure to strong chemicals, elevated temperature, fluctuating pressure, and solid build-up can all impact the sensor life. As the sensor ages, a sluggish response may become more apparent, and will require more frequent calibrations to compensate for this change. The overall health of the Arc pH sensors can be seen using the quality indicator in ArcAir software. Click to learn more about sensor lifespan and expiration in the Knowledgebase article.
What solution should I store my pH or ORP probe in?Hamilton recommends storing pH and ORP probes wet in either Hamilton Storage Solution (Ref 238931) or in 3M KCl solution. Click to see the pH/ ORP Sensor Storage and Regeneration Knowledgebase for more information.
What is A-length and how is it measured?A-length refers to the insertion depth of the sensor. It's generally measured from the base of the PG13.5 mounting threads but can vary with certain styles of sensors.
Connecting Arc pH / ORP Sensors to the Bioreactor
Arc Wi Wireless Bluetooth Adapters for probesThere are two versions of the Wi Wireless Bluetooth adapter. This article gets into the selection, wiring, and isolation of these products.
ArcAir Minimum Sensor Firmware RequirementsThis article lists the minimum firmware levels for all Arc sensors to properly work with ArcAir Software.
Modbus Communication Basics for Arc Intelligent SensorsThis simple primer article discusses the basic setup of Modbus for Arc intelligent sensors and VisiFerm ECS DO sensors.
We're Ready to Help
Hamilton's sales, customer service, and technical support staff are available for questions and additional information about all products and services.Contact Us