10 µL, Model 1701 RN Agilent SYR, Small Removable NDL, 26s ga, 1.71 in, point style 2
Found in these product categories:
Variants
A Certificate of Calibration is provided with the product and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T.
![Syringe 80011](https://assets-labs.hamiltoncompany.com/Images-Product/_1060x830_fit_center-center_none/syringe_80011.jpg?v=1705011485)
![Syringe 80011](https://assets-labs.hamiltoncompany.com/Images-Product/_1060x830_fit_center-center_none/syringe_80011.jpg?v=1705011485)
-
$75.00(In Stock)(In Stock)Stock status is updated daily. For real-time status, please contact us.
-
$283.00(Made to Order)(Made to Order)This product is calibrated at time of order.
Specifications
Volume |
Volume
10 µL
|
---|---|
Syringe Type |
Syringe Type
Gastight
|
Syringe Series |
Syringe Series
1700
|
Termination |
Termination
Removable Needle (RN)
|
Needle |
Needle
Small RN
|
Gauge |
Gauge
26s gauge
|
Point Style |
Point Style
2
|
Additional specifications
Needle Length |
Needle Length
1.71 inch (43.4 mm)
|
---|---|
Fluid Path |
Fluid Path
SST, Borosilicate glass, PTFE
|
Autoclavable |
Autoclavable
Yes
|
Gas Sterilizable |
Gas Sterilizable
Yes
|
Pressure |
Pressure
1000 psig (68.9 bar)
|
Maximum Temperature |
Maximum Temperature
80°C / 176°F
|
Minimum Temperature |
Minimum Temperature
10°C / 50°F
|
Barrel Inner Diameter |
Barrel Inner Diameter
0.018 inches (0.460 mm)
|
Barrel Outer Diameter |
Barrel Outer Diameter
0.260 inches (6.60 mm)
|
Needle Inner Diameter |
Needle Inner Diameter
0.005 inches (0.13 mm)
|
Needle Outer Diameter |
Needle Outer Diameter
0.0187 inches (0.47 mm)
|
Std Needle Dead Volume |
Std Needle Dead Volume
0.55 μL
|
Sales Quantity |
Sales Quantity
1 syringe per pack
|
![Syringe Custom Built](https://assets-labs.hamiltoncompany.com/Images-Knowledge-Base/_thumbnail/Custom-built-thumb_IR1.jpg?v=1705959484)
Work with R&D engineers to customize Hamilton parts
Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.
Talk to an engineer