Compare Products | Hamilton Company

ODO Cap S0 (discontinued)

The Hamilton ODO Cap S0 Kit for the optical measurement of Dissolved Oxygen (DO) is a Single-Use (SU) cap for the VisiFerm SU sensor. It can be integrated into the single-use container within a 1" barbed bag port. The port fitting is available for integrators such as single-use bioreactor manufacturers.

This product is replaced by the ODO Cap S3.

Optical DO Cap S2 Kit

The Hamilton ODO Cap S2 Kit for the optical measurement of Dissolved Oxygen (DO) is a Single-Use (SU) cap for the VisiFerm SU sensor. It can be integrated into the single-use container (e.g., in a well tube) with an inner thread M14x1-LH (Left-Handed thread). The ODO Cap S2 is available for integrators such as single-use bioreactor manufacturers.

Optical DO Cap S3 Kit

The Hamilton ODO Cap S3 Kit for the optical measurement of Dissolved Oxygen (DO) is a Single-Use (SU) cap for the VisiFerm SU sensor. It can be integrated into the single-use container within a 1" barbed bag port. The port fitting is available for integrators such as single-use bioreactor manufacturers.

Measuring Range 4 ppb to 25 ppm (DO)
0 to 62.85 %-vol
0 to 300 %-sat

Accuracy at 25 °C ± 1.0 %-sat (at 20 %-sat) after gamma irradiation and with product calibration
± 1.0 %-sat (at 100 %-sat) after gamma irradiation and with product calibration
± 2.5 %-sat (at 200 %-sat) after gamma irradiation and with product calibration

Accuracy at 25 °C ± 1.0 %-sat (at 20 %-sat)
± 1.0 %-sat (at 100 %-sat)
± 2.5 %-sat (at 200 %-sat)
All three accuracy values are valid with calibration values provided on sensor label and after product calibration after irradiation and dry storage up to 37 months

Drift at Room Temperature < 1 % per week (of measurement value)

Drift at Room Temperature —

Calibration Data Yes, provided on sensor label

Calibration Data —

Biocompatibility Yes, study report available upon request.

Biocompatibility —

Wet-in Time 30 min after dry storage

Wet-in Time < 30 min (after dry storage)

Shelf Life 12 months prior gamma irradiation
24 months after gamma irradiation

Shelf Life 24 months before irradiation
37 months after irradiation

Wetted Parts PA (Cycloaliphatic polyamide)
EPDM (Ethylene propylene elastomer)
VMQ (Silicone elastomer)
See compliance details in Material Specification document

Wetted Parts PA (Cycloaliphatic polyamide)
VMQ (Silicone elastomer)
See compliance details in Material Specification document

Serial Number Yes

Serial Number —

Response Time t98% < 30 s at 25 °C

Response Time —

Autoclavable No

Autoclavable —

Steam Sterilizable No

Steam Sterilizable —

CIP No

CIP —

Gamma Irradiatable Yes, up to 50 kGy

Gamma Irradiatable —

Operating Temperature Range 4 to 50 °C

Pressure Range bar g 0 to 2 bar

Pressure Range bar g —

Drift at 25 °C —

Drift at 25 °C < 1 % per week (of measurement value)

Response Time at 25 °C —

Response Time at 25 °C t98% < 30 s at 25 °C (from 0%-sat to 100%-sat)

Burst Pressure —

Burst Pressure Up to 10 barg

Storage Temperature Range —

Storage Temperature Range 4 to 40 °C in non-condensing environment (<85% r. H.)

Transport Temperature Range —

Transport Temperature Range -30 to 60 °C (according to ASTM D4169-13)

Sterilization —

Sterilization Gamma irradiation compatible (up to 50 kGy)
X-Ray irradiation compatible (up to 50 kGy)
Not validated for autoclavation, Sterilization In Place (SIP), nor Cleaning In Place (CIP)

Chemical Resistance —

Chemical Resistance See Chemical Resistance Guide

Pharma & Biopharma Bioprocess Downstream Single-Use Bioprocessing Agri-Food and Beverage Novel Food Bioprocessing Precision Fermentation

Request Quote