250 µL, Model 1825 RN SYR, Large Removable NDL, 22s ga, 2 in, point style 2
The 1800 series syringes are the reinforced plunger version of the 1700 series syringes. Attached to the flange of the syringe is a blue syringe holder. The syringe holder provides an area to hold the syringe that prevents heat transfer, dispense inaccuracies, and plunger blow outs. Additionally, it provides support to small-volume plungers that are prone to bending during injection. This series of syringes are ideal for dispensing volumes from 1 µL up to 250 µL.
Compatible with Large RN Hub Needles
Found in these product categories:
Variants


-
$154.00(In Stock)(In Stock)Stock status is updated daily. For real-time status, please contact us.
-
$383.00(In Stock)(In Stock)Stock status is updated daily. For real-time status, please contact us.
Specifications
Volume |
Volume
250 µL
|
---|---|
Syringe Type |
Syringe Type
Gastight
|
Syringe Series |
Syringe Series
1800
|
Termination |
Termination
Removable Needle (RN)
|
Needle |
Needle
Large RN
|
Gauge |
Gauge
22s gauge
|
Point Style |
Point Style
2
|
Additional specifications
Needle Length |
Needle Length
2 inch (51 mm)
|
---|---|
Fluid Path |
Fluid Path
SST, Borosilicate glass, PTFE
|
Autoclavable |
Autoclavable
Yes
|
Gas Sterilizable |
Gas Sterilizable
Yes
|
Pressure |
Pressure
500 psig (34.5 bar)
|
Maximum Temperature |
Maximum Temperature
80°C / 176°F
|
Minimum Temperature |
Minimum Temperature
10°C / 50°F
|
Barrel Inner Diameter |
Barrel Inner Diameter
0.091 inches (2.30 mm)
|
Barrel Outer Diameter |
Barrel Outer Diameter
0.305 inches (7.75 mm)
|
Needle Inner Diameter |
Needle Inner Diameter
0.0059 inches (0.15 mm)
|
Needle Outer Diameter |
Needle Outer Diameter
0.0283 inches (0.72 mm)
|
Std Needle Dead Volume |
Std Needle Dead Volume
1.13 µL
|
Sales Quantity |
Sales Quantity
1 syringe per pack
|
Resources
Documents
-
Instructions

Work with R&D engineers to customize Hamilton parts
Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.
Talk to an engineer