10 µL Gastight Syringe Model 1801 N, Cemented Needle, 26s gauge, 2 in, point style 2

The 1800 series syringes are the reinforced plunger version of the 1700 series syringes. Attached to the flange of the syringe is a blue syringe holder. The syringe holder provides an area to hold the syringe that prevents heat transfer, dispense inaccuracies, and plunger blow outs. Additionally, it provides support to small-volume plungers that are prone to bending during injection. This series of syringes are ideal for dispensing volumes from 1 µL up to 250 µL.

Found in these product categories:

Variants

A Certificate of Calibration is provided with the product and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T.
  • $118.00
    (In Stock)
    (In Stock)
    Stock status is updated daily. For real-time status, please contact us.
  • $337.00
    (Made to Order)
    (Made to Order)
    This product is calibrated at time of order.

Specifications

Volume
Volume
10 µL
Syringe Type
Syringe Type
Gastight
Syringe Series
Syringe Series
1800
Termination
Termination
Cemented Needle (N)
Needle
Needle
Cemented Needle
Gauge
Gauge
26s gauge
Point Style
Point Style
2: Curved, Beveled

Additional specifications

Needle Length
Needle Length
2 inch (51 mm)
Fluid Path
Fluid Path
SST, Borosilicate glass, PTFE
Autoclavable
Autoclavable
No
Gas Sterilizable
Gas Sterilizable
Yes
Pressure
Pressure
1000 psig (68.9 bar)
Maximum Temperature
Maximum Temperature
50°C / 122°F
Minimum Temperature
Minimum Temperature
10°C / 50°F
Barrel Inner Diameter
Barrel Inner Diameter
0.018 inches (0.460 mm)
Barrel Outer Diameter
Barrel Outer Diameter
0.260 inches (6.60 mm)
Needle Inner Diameter
Needle Inner Diameter
0.005 inches (0.13 mm)
Needle Outer Diameter
Needle Outer Diameter
0.0187 inches (0.47 mm)
Std Needle Dead Volume
Std Needle Dead Volume
0.64 µL
Sales Quantity
Sales Quantity
1 syringe per pack
Syringe Custom Built

Work with R&D engineers to customize Hamilton parts

Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.

Talk to an engineer