Register for a Hamilton Webinar!

25 µL Microliter Syringe Model 802 N, Cemented Needle, 22s gauge, 2 in, point style 2

The 800 series syringes are the reinforced plunger version of the original 700 series syringes. Attached to the flange of the syringe is a blue Syringe Holder. The Syringe Holder provides a place to hold the syringe that prevents heat transfer to the barrel, causing dispense inaccuracies. Additionally, the adaptation provides support to small-volume plungers that are prone to bending during injection. This series of Microliter syringes is ideal for dispensing volumes from 0.5 μL up to 250 μL.

Found in these product categories:

Variants

A Certificate of Calibration is provided with the product and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T.
  • $125.00
    (In Stock)
    (In Stock)
    Stock status is updated daily. For real-time status, please contact us.
  • $346.00
    (Made to Order)
    (Made to Order)
    This product is calibrated at time of order.

Specifications

Volume
Volume
25 µL
Syringe Type
Syringe Type
Microliter
Syringe Series
Syringe Series
800
Termination
Termination
Cemented Needle (N)
Needle
Needle
Cemented Needle
Gauge
Gauge
22s gauge
Point Style
Point Style
2

Additional specifications

Needle Length
Needle Length
2 inch (51 mm)
Fluid Path
Fluid Path
SST, borosilicate glass
Autoclavable
Autoclavable
No
Gas Sterilizable
Gas Sterilizable
Yes
Pressure
Pressure
2000 psig (137.9 bar)
Maximum Temperature
Maximum Temperature
50°C / 122°F
Minimum Temperature
Minimum Temperature
10°C / 50°F
Barrel Inner Diameter
Barrel Inner Diameter
0.029 inches (0.729 mm)
Barrel Outer Diameter
Barrel Outer Diameter
0.305 inches (7.75 mm)
Needle Inner Diameter
Needle Inner Diameter
0.0059 inches (0.15 mm)
Needle Outer Diameter
Needle Outer Diameter
0.0283 inches (0.72 mm)
Std Needle Dead Volume
Std Needle Dead Volume
1.13 µL
Sales Quantity
Sales Quantity
1 syringe per pack
Syringe Custom Built

Work with R&D engineers to customize Hamilton parts

Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.

Talk to an engineer