PRP-X110 Anion Exchange HPLC Column, 4.1 x 150 mm, 7 µm

Hamilton PRP-X100 and PRP-X110 are highly stable, inert materials. For high sensitivity, Hamilton PRP-X110 ion chromatography columns are used to separate ions at concentrations from less than 20 ppb to 20 ppm. The PRP-X110 has similar selectivity to the PRP-X100 but provides lower limits of detection as a result of its lower exchange capacity.


Application Examples: Arsenic speciation, organic and inorganic anions, organic acids, halides, nucleotides.

Found in these product categories:

Part/REF # 79732
Hplc Column Ss Analytical Cropped Dsc 0003 Vv
  • $562.80
    (In Stock)
    (In Stock)
    Stock status is updated daily. For real-time status, please contact us.

Specifications

Download as PDF
Separation Mode
Separation Mode
Anion Exchange
Stationary Phase
Stationary Phase
PRP-X110
Format
Format
HPLC Column
Hardware Inner Diameter
Hardware Inner Diameter
4.1 mm
Hardware Length
Hardware Length
150 mm
Particle Size
Particle Size
7 µm
USP Classification
USP Classification
USP L47

Additional specifications

Packing Material Type
Packing Material Type
PSDVB/Trimethylammonium
Pore Size
Pore Size
100 Å
Particle Surface Area (m2/cm3)
Particle Surface Area (m2/cm3)
476
Pore Volume (cm3/g)
Pore Volume (cm3/g)
0.728
Hardware Material
Hardware Material
Stainless Steel
Max Pressure
Max Pressure
5,000 psi
Exchange Capacity
Exchange Capacity
0.11 meq/gm
Exchange Capacity/Column
Exchange Capacity/Column
0.088 meq/column
Mobile Phase Limits
Mobile Phase Limits
pH 1-13. 0-100% aqueous, organic modifier
Buffer Strength
Buffer Strength
0.0-0.5N
Temp Limits
Temp Limits
pH 1-7.9 (5-60°C); pH 8-13 (5-30°C)
Restoration
Restoration
Pump approximately 50 mL of methanol with 1% 6 N nitric acid.
Compound Classification
Compound Classification
Organic/Inorganic Anions
UOM
UOM
1 EACH

Related Products

Accessories

Syringe Custom Built

Work with R&D engineers to customize Hamilton parts

Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.

Talk to an engineer