Compare Products | Hamilton Company

Arc Module Incyte-P SU

The Arc Module Incyte-P SU enables seamless integration of Incyte-P SU single-use viable cell density sensors with bioreactor control systems by converting data to Modbus RTU or 4-20 mA signals, offering both wired and wireless connectivity for real-time insights and data-driven process optimization.

Arc Module Incyte-W SU

The Arc Module Incyte-W, in combination with the Incyte-W SU, enables real-time, in-situ measurement of viable cells in wave bags. This allows for the detection and response of events in real time without the need for offline sampling.

Incyte Arc Expert - 120

The Incyte Arc Expert sensor enables in-line, real-time viable cell density measurement, essential for achieving data-driven process optimization and control in bioprocessing.

Incyte Arc Expert - 220

The Incyte Arc Expert sensor enables in-line, real-time viable cell density measurement, essential for achieving data-driven process optimization and control in bioprocessing.

Incyte Arc Expert - 320

The Incyte Arc Expert sensor enables in-line, real-time viable cell density measurement, essential for achieving data-driven process optimization and control in bioprocessing.

Incyte Arc Expert - 420

The Incyte Arc Expert sensor enables in-line, real-time viable cell density measurement, essential for achieving data-driven process optimization and control in bioprocessing.

Incyte-P SU

Hamilton Incyte-P SU sensor element provides a cost-effective, viable cell density measurement solution for integration into single-use containers. It offers a perfect balance between high reliability and affordability, utilizing proven sensor technology from traditional sensors.

Incyte-PO SU

Hamilton Incyte-PO SU sensor element provides a cost-effective, viable cell density measurement solution for integration into single-use containers. It is optimized for welding to bag films and offers a perfect balance between high reliability and affordability, utilizing proven sensor technology from traditional sensors.

Permittivity Simulator

An electrical cap will be used to check the integrity of the Incyte pre-amplifier during the validation and calibration routine. This product is discontinued. Find alternative products in the Product Comparison below.

Electrical Connector VP8

Electrical Connector —

Parameter Viable Cell Density

Parameter —

Measuring Range 0 to 700 pF/cm, equivalent to 5 x 10^5 to 8 x 10^9 cells/mL (mammalian)

Measuring Range Permittivity: 0 to 700 pF/cm, equivalent to 5 x 10^5 to 8 x 10^9 cells/mL (mammalian)
Conductivity: 1 to 50 mS/cm

Measuring Range —

Temperature Sensor Yes (on sensor element: Incyte-P SU)

Temperature Sensor Yes

Temperature Sensor —

Configurable Values VCD, Conductivity, Temperature

Configurable Values —

Digital Interface RS485 Modbus (max. 32 addresses)

Digital Interface —

Baud Rate 4800, 9600, 19200, 38400, 57600, 115200 Bd

Baud Rate 19200, 38400, 57600,115200 Bd

Baud Rate —

Operating Voltage 24 V (± 10 %)

Operating Voltage —

Sensor Output Arc: Modbus

Sensor Output Electrical resistivity
Permittivity (Viable Cell Density)
NTC 22 kOhm (temperature resistor)

Sensor Output —

Serial Number Yes

Serial Number —

Certificate Yes

Certificate —

Autoclavable No

Autoclavable Yes (30-minute sterilization duration, for Revision 00: 130°C, for Revision ≥ 01: 140°C)

Autoclavable —

Steam Sterilizable No

Steam Sterilizable Yes (140°C, 30-minute sterilization duration)

Steam Sterilizable —

CIP No

CIP Yes (3% NaOH, 90°C, 30-minute cleaning duration)

CIP —

Gamma Irradiatable No

Gamma Irradiatable —

X-Ray irradiatable No

X-Ray irradiatable —

Operating Temperature Range 0 to 60 °C

Operating Temperature Range 4 to 50 °C

Operating Temperature Range —

Conductivity Range 1 to 50 mS/cm

Conductivity Range 1 to 80 mS/cm for firmware below CDCUM003
0.5 to 80 mS/cm for firmware CDCUM003 and above (with Hamilton calibration)

Conductivity Range —

Protection Rating IP64 (when connected to the sensor element: Incyte-P SU)

Protection Rating —

Precision at 25 °C —

Precision at 25 °C Permittivity (at 1 MHz): ± 1 pF or ± 1 %
Whichever value is greater over the entire measuring range

Precision at 25 °C —

Accuracy at 25 °C —

Accuracy at 25 °C Conductivity (at 0 pF): ± 25 µS or ± 1 %
Whichever value is greater over the entire measuring range

Accuracy at 25 °C Conductivity (at 0 pF): ± 3 %
Over the entire measuring range

Accuracy at 25 °C —

O-ring Material —

O-ring Material See compliance details in Material Specification document

O-ring Material —

Surface Quality of Steel —

Surface Quality of Steel Ra < 0.4 µm (N5)

Surface Quality of Steel —

Wetted Parts —

Wetted Parts Stainless Steel 1.4435
PEEK (Polyetheretherketone)
Platinum
EPDM (Ethylene propylene elastomer)
See compliance details in Material Specification document

Wetted Parts Platinum
Glass / Ceramic
HDPE (High Density Polyethylene)
See compliance details in Material Specification document

Wetted Parts Platinum
Glass / Ceramic
HDPE (High Density Polyethylene)
TPE-O (LDPE) (Thermoplastic Elastomer Olefinic Base)
See compliance details in Material Specification document

Wetted Parts —

Process Connection —

Process Connection PG13,5

Process Connection —

Diameter —

Diameter 12 mm

Diameter —

Pressure Range bar g —

Pressure Range bar g 0 to 12 bar

Pressure Range bar g —

Resolution at 25 °C —

Resolution at 25 °C 0.1 pF/cm

Resolution at 25 °C —

Max. Accuracy —

Max. Accuracy Conductivity (at 0 pF): ± 100 µS (for whole operating temperature range)

Max. Accuracy —

Max. Precision —

Max. Precision Permittivity (over all frequencies): ± 1 pF (for whole operating temperature range)

Max. Precision —

a-length —

a-length 120 mm

a-length 220 mm

a-length 320 mm

a-length 420 mm

a-length —

Drift at 25 °C —

Drift at 25 °C No observable drift

Drift at 25 °C —

Wet-in Time —

Wet-in Time < 30 min (after dry storage)

Wet-in Time —

Response Time at 25 °C —

Response Time at 25 °C t98% < 30 s (conductivity: 1.413 to 50 mS/cm)

Response Time at 25 °C —

Shelf Life —

Shelf Life 24 months before irradiation
37 months after irradiation

Shelf Life —

Patch type —

Patch type Legacy (See drawing)

Patch type Overmold (See drawing)

Patch type —

Burst Pressure —

Burst Pressure Up to 10 barg

Burst Pressure —

Storage Temperature Range —

Storage Temperature Range 4 to 40 °C in non-condensing environment (<85% r. H.)

Storage Temperature Range —

Transport Temperature Range —

Transport Temperature Range -30 to 60 °C (according to ASTM D4169-13)

Transport Temperature Range —

Sterilization —

Sterilization Gamma irradiation compatible (up to 50 kGy)
X-Ray irradiation compatible (up to 50 kGy)
Not validated for autoclavation, Sterilization In Place (SIP), nor Cleaning In Place (CIP)

Sterilization —

Chemical Resistance —

Chemical Resistance See Chemical Resistance Guide

Chemical Resistance —

Pharma & Biopharma Bioprocess Downstream Single-Use Bioprocessing Bioprocess Upstream

Pharma & Biopharma Bioprocess Downstream Single-Use Bioprocessing Agri-Food and Beverage

Cell Biology Cell Culture Pharma & Biopharma Bioprocess Upstream Biotechnology Algae Water, Energy, & Environment Water and Wastewater Chemical Processes Basic Chemicals Agri-Food and Beverage Winemaking Novel Food Bioprocessing Precision Fermentation Cultivated Meat Cultivated Fish & Seafood

Pharma & Biopharma Bioprocess Downstream Single-Use Bioprocessing Bioprocess Upstream Biotechnology

Request Quote

Add to Cart