Compare Products | Hamilton Company

Conducell UPW Arc PG13,5

The Conducell UPW sensor provides industry-leading, accuracy and sensitivity for producing pure and ultra-pure water in the pharmaceutical industry.

Conducell UPW Arc TC 1.5"

The Conducell UPW sensor provides industry-leading, accuracy and sensitivity for producing pure and ultra-pure water in the pharmaceutical industry.

Conducell UPW PG 13,5

The Conducell UPW sensor provides industry-leading accuracy and sensitivity for producing pure and ultrapure water in the pharmaceutical industry. The sensor is USP 645, EP, JP and FDA compliant.

Conducell 2DC-PG

The Conducell 2DC-PG 2-Pole sensor is a basic low-cost sensor ideal for contaminant free processes. It's 1.0 cell constant allows for measurements from 10 µS/cm to 20 mS/cm. The plastic shaft and graphite electrode are easy to clean. The 5 M fixed cable allows for easy submersion beneath the liquid surface. This product must be connected to a conductivity transmitter such as the H100.

Sensor Family Conducell UPW

Sensor Family —

Electrical Connector VP8

Electrical Connector VP6

Electrical Connector 5 m Fix Cable / Open End

Parameter Conductivity (2-pole)

Parameter —

Measuring Range 0.01 to 1500 µS/cm

Measuring Range 0.02 to 2000 µS/cm

Measuring Range 10 µS/cm to 20 mS/cm

Accuracy at 25 °C ± 3 %

Accuracy at 25 °C —

Cell Constant < 0.1 / cm

Cell Constant 1/cm

Temperature Sensor NTC 22 kOhm

Temperature Sensor Pt1000

Configurable Values Conductivity: µS/cm, mS/cm; Temperature: °C, °F, K

Configurable Values —

O-ring Material —

O-ring Material EPDM; FDA 21 CFR 177.2600; EC 1935/2004; ISO 10993-5; USP <87>; USP <88> class VI (121 °C)

Surface Quality of Steel Ra < 0.4 µm (N5, electropolished)

Surface Quality of Steel —

Analog Interface 1 4 to 20 mA for conductivity, programmable

Analog Interface 1 —

Analog Interface 2 4 to 20 mA for Temp., programmable

Analog Interface 2 —

Analog Interface 1 and 2 Galvanically not isolated; pulse width modulation 3.5 kHz

Analog Interface 1 and 2 —

Digital Interface RS485 Modbus (max. 32 addresses)

Digital Interface —

Baud Rate 4800, 9600, 19200, 38400, 57600, 115200 Bd

Baud Rate —

Operating Voltage 7 to 30 VDC max. 150 mW

Operating Voltage —

Sensor Output Arc: Modbus, 4 to 20 mA

Sensor Output Traditional

Sensor Output —

Wetted Parts Stainless Steel 1.4435
PEEK (Polyetheretherketone)
EPDM (Ethylene propylene elastomer)
See compliance details in Material Specification document

Wetted Parts Graphite
EPDM (Ethylene propylene elastomer)
SAN (Polystyrene-Acrylonitrile)

Serial Number Yes

Certificate Yes, with nominal and actual cell constant

Certificate No

ATEX Approval No

ATEX Approval II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db

ATEX Approval No

IECEx Approval No

IECEx Approval II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db

IECEx Approval —

Autoclavable Yes, max. Temperature 130 °C

Autoclavable Yes

Autoclavable No

Steam Sterilizable Yes, max. Temperature 140 °C

Steam Sterilizable Yes

Steam Sterilizable No

CIP Yes

CIP No

Operating Temperature Range Analog interface: 0 to 110 °C; Digital interface: 0 to 130 °C

Operating Temperature Range -10 to 140 °C

Operating Temperature Range -5 to 80 °C

Pressure Range bar g 0 to 10 bar g (130 °C)

Pressure Range bar g 0 to 6 bar

Max. Pressure bar g 10 bar g (130 °C)

Max. Pressure bar g —

a-length 120 mm

a-length 87 mm

a-length 120 mm

Process Connection PG13,5

Process Connection Triclamp 1.5"

Process Connection PG13,5

Diameter 12 mm

Diameter 17 mm

Diameter 12 mm

Water, Energy, & Environment Water and Wastewater Power Generation Chemical Processes Small Molecules Pharmaceuticals Petrochemicals, Oil & Gas Processing

Pharma & Biopharma Water, Energy, & Environment Water and Wastewater Chemical Processes Small Molecules Pharmaceuticals Petrochemicals, Oil & Gas Processing

Water, Energy, & Environment Water and Wastewater

Request Quote