700 Series Syringes

Volumes are based on 60 mm scale length except models 75 and 701 which are based on 54.1 mm scale length. O.D. dimensions are nominal and typical, I.D. dimensions are theoretical.

ModelVolumeOuter Diameter Nominal Inner Diameter Theoretical Bore
75 5 6.6 mm (0.26 in) 0.34 mm (0.014 in)
701 10 6.6 mm (0.26 in) 0.49 mm (0.019 in)
702 25 7.7 mm (0.305 in) 0.73 mm (0.029 in)
705 50 7.7 mm (0.305 in) 1.03 mm (0.041 in)
710 100 7.7 mm (0.305 in) 1.4 mm (0.061 in)
725 250 7.7 mm (0.305 in) 2.3 mm (0.091 in)
750 500 7.7 mm (0.305 in) 3.26 mm (0.135 in)

7000 Series Syringes

Note: The plunger of a 7000 series syringe uses a tungsten wire that travels through the syringe to the tip of the needle. The seal is created by a PTFE ferrule within the knurled hub termination. The I.D. of the needle is honed to fit the tungsten wire. The displacement calculation is based on the O.D. of the plunger wire which is displayed as Theoretical Bore above. The O.D. is the outside diameter of the glass barrel.

ModelVolumeOuter Diameter Nominal Inner Diameter Theoretical Bore
7000.5 (32 gauge) 0.5 7.8 mm (0.308 in) 0.104 mm (0.0041 in)
7000.5 (25 gauge) 0.5 7.8 mm (0.308 in) 0.104 mm (0.0041 in)
7001 (25 gauge) 1 7.8 mm (0.308 in) 0.145 mm (0.0057 in)
7101 (22 gauge) 1 7.8 mm (0.308 in) 0.145 mm (0.0057 in)
7002 (25 gauge) 2 7.8 mm (0.308 in) 0.206 mm (0.0081 in)
7102 (23 gauge) 2 7.8 mm (0.308 in) 0.206 mm (0.0081 in)
7105 (24 gauge) 5 7.8 mm (0.308 in) 0.325 mm (0.0128 in)

1700 Series Syringes

ModelVolumeOuter Diameter Nominal Inner Diameter Theoretical Bore
1701 10 6.6 mm (0.26 in) 0.46mm (0.018 in)
1702 25 7.7 mm (0.305 in) 0.73 mm (0.029 in)
1705 50 7.7 mm (0.305 in) 1.03 mm (0.041 in)
1710 100 7.7 mm (0.305 in) 1.4 mm (0.057 in)
1725 250 7.7 mm (0.305 in) 2.3 mm (0.091 in)
1750 500 7.7 mm (0.305 in) 3.26 mm (0.128 in)

1000 Series Syringes

ModelVolumeOuter Diameter Nominal Inner Diameter Theoretical Bore
1001 1 9 mm (0.355 in) 4.61 mm (0.181 in)
1001.25 1.25 8.6 mm (0.329 in) 5.15 mm (0.203 in)
1002
(thin wall)
2.5 9.7 mm (0.375 in) 7.29 mm (0.287 in)
1002
(thick wall)
2.5 10.3 mm (0.407 in) 7.29 mm (0.287 in)
1005 5 13.5 mm (0.53 in) 10.3 mm (0.406 in)
1010 10 17.7 mm (0.695 in) 14.57 mm (0.574 in)
1025 25 27.1 mm (1.067 in) 23.03 mm (0.907 in)
1050 50 36.9 mm (1.452 in) 32.54 mm (1.282 in)
1100 100 36.9 mm (1.452 in) 32.54 mm (1.282 in)

Super Syringes

ModelOuter Diameter Nominal Inner Diameter Theoretical Bore
S0500 75 mm (2.95 in) 62 mm (2.44 in)
S1000 100 mm (3.95 in) 87 mm (3.44 in)
S1500 101 mm (3.95 in) 88 mm (3.44 in)
S2000 102 mm (3.95 in) 89 mm (3.44 in)