PRP-X400 7 µm 4.6 x 250 mm PEEK
The PRP-X400 column provides a fast separation for glyphosate and its metabolites, due in part to the higher exchange capacity of the resin. It also performs well in other separations, such as inositol and sugar alcohols. This column operates well at room temperature, so a column heater is not necessary for glyphosate separation. PRP-X400 columns are also very cost effective relative to most glyphosate columns.
Application Examples: Glyphosate and its metabolites in drinking water, inorganic and organic cations.
Found in these product categories:
Part/REF # 79387-
$845.25(In Stock)(In Stock)Stock status is updated daily. For real-time status, please contact us.
Specifications
Separation Mode |
Separation Mode
Cation Exchange
|
---|---|
Stationary Phase |
Stationary Phase
PRP-X400
|
Format |
Format
HPLC Column
|
Hardware Inner Diameter |
Hardware Inner Diameter
4.6 mm
|
Hardware Length |
Hardware Length
250 mm
|
Particle Size |
Particle Size
7 µm
|
Packing Material Type |
Packing Material Type
PSDVB/Sulfonic Acid
|
Additional specifications
Pore Size |
Pore Size
N/A
|
---|---|
Particle Surface Area (m2/cm3) |
Particle Surface Area (m2/cm3)
8.25
|
Pore Volume (cm3/g) |
Pore Volume (cm3/g)
0.0576
|
Hardware Material |
Hardware Material
PEEK
|
Max Pressure |
Max Pressure
5,000 psi
|
Exchange Capacity |
Exchange Capacity
2.5 meq/gm
|
Mobile Phase Limits |
Mobile Phase Limits
pH 1-13. 0-100% aqueous, organic modifier
|
Buffer Strength |
Buffer Strength
0.0-0.5N
|
Temp Limits |
Temp Limits
5-30°C
|
Restoration |
Restoration
Inject several times with 100 µL of 0.1 M potassium EDTA
|
Compound Classification |
Compound Classification
Glyphosate
|
UOM |
UOM
1 EACH
|
Resources
Documents
-
Guides
-
Instructions
-
SDS
Related Content
- HPLC Guard Columns, HPLC Guard Cartridges Article
- How Do I Connect a Stainless Steel Guard Column to My HPLC Column? FAQ
- How Do I Connect a PEEK Guard Cartridge to My HPLC Column? FAQ
- Choosing Column Specifications Article
- HPLC Column Instructions for Polymer Stationary Phases Article
Work with R&D engineers to customize Hamilton parts
Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.
Talk to an engineer