PRP-X600 7 µm 4.6 x 50 mm PEEK
PRP-X600 is a superficially porous support. Superficial porosity results in fast separation with better sample capacity and shortened diffusion path, resulting in sharper sample bands than nonporous supports. Rapid gradient changes typically lower column efficiency, however, PRP-X600 shows very favorable biomolecule separation efficiency with much shorter run times when rapid gradient changes are employed.
Application Examples: Nucleic acids such as single stranded/double stranded RNA and DNA, peptides, and proteins.
Found in these product categories:
Part/REF # 79360![Prp X600](https://assets-labs.hamiltoncompany.com/Images-Category-Group/_1060x830_fit_center-center_none/PRP-X600.jpg?v=1704996154)
-
$443.10(In Stock)(In Stock)Stock status is updated daily. For real-time status, please contact us.
Specifications
Separation Mode |
Separation Mode
Anion Exchange
|
---|---|
Stationary Phase |
Stationary Phase
PRP-X600
|
Format |
Format
HPLC Column
|
Hardware Inner Diameter |
Hardware Inner Diameter
4.6 mm
|
Hardware Length |
Hardware Length
50 mm
|
Particle Size |
Particle Size
7 µm
|
Packing Material Type |
Packing Material Type
PSDVB/Poly (dimethyl amido-propyl methacrylamide)
|
Additional specifications
Pore Size |
Pore Size
Superficially Porous
|
---|---|
Particle Surface Area (m2/cm3) |
Particle Surface Area (m2/cm3)
1.4
|
Pore Volume (cm3/g) |
Pore Volume (cm3/g)
0.0046
|
Hardware Material |
Hardware Material
PEEK
|
Max Pressure |
Max Pressure
5,000 psi
|
Exchange Capacity |
Exchange Capacity
1.6 meq/gm
|
Mobile Phase Limits |
Mobile Phase Limits
pH 1-13. 0-100% aqueous, organic modifier
|
Buffer Strength |
Buffer Strength
0.0-1.0N
|
Temp Limits |
Temp Limits
5-30°C
|
Compound Classification |
Compound Classification
Labeled/Unlabeled DNA
|
UOM |
UOM
1 EACH
|
Resources
Documents
-
Guides
-
SDS
Related Content
- HPLC Guard Columns, HPLC Guard Cartridges Article
- PRP-X600 Anion Exchange DNA Column Article
- How Do I Connect a Stainless Steel Guard Column to My HPLC Column? FAQ
- How Do I Connect a PEEK Guard Cartridge to My HPLC Column? FAQ
- How Do I Install My HPLC Column? FAQ
![Syringe Custom Built](https://assets-labs.hamiltoncompany.com/Images-Knowledge-Base/_thumbnail/Custom-built-thumb_IR1.jpg?v=1705959484)
Work with R&D engineers to customize Hamilton parts
Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.
Talk to an engineer