Arc Sensor Cables

Arc sensors output a robust 4 - 20 mA analog or digital signal. Hamilton offers both powered and non-powered VP8 cables for direct connection to the sensor or M12-8 pin cables for use with the Arc Wi 2G Bluetooth adapter. Arc pH/ORP ECS Adapters will convert the pH signal from digital back to analog for use with bioreactors or transmitters that only accept a conventional pH signal.
Watch the Video: Connecting Arc pH to Traditional Bioreactors
-
Arc Power Cables (ArcAir to PC or passive hard-wired connections)
-
Arc VP8 Data Cables (Modbus or 4-20mA connection to powered devices)
-
Arc M12 / Open 8-Pole Data Cables
-
Arc M12 / VP8 Data Cables (OEM bioreactor applications)
-
Arc pH / ORP ECS Adapters (analog bioreactor and transmitter applications)
Connecting Arc pH to a Traditional Bioreactor?
Taking advantage of the benefits of Arc pH sensors on a traditional bioreactor requires bypassing a controller’s built-in milli-volt sensor input. The introduction of the Arc ECS Adapter simplifies this connection by utilizing the existing bioreactor milli volt input.
Hamilton offers a variety of adapter cables to connect sensors directly to the controller. The bioreactor cable guide is a filterable reference table for many well-known brands of bioreactors on the market.
Resources
-
Catalog - Process Analytics
Download the Process Analytics sensor catalog to learn about the complete offering of Hamilton process sensors and accessories. -
Brochure - Arc Intelligent Sensors
Arc Intelligent sensors offer a new way to connect to your process control system. -
Technical Note - Change Notification VP8 Cables
Change Notification for VP8 Cables
-
What is the Arc USB Power Cable?
The Arc USB Power Cable allows direct connection of Arc sensors to a PC or laptop running ArcAir Software. The cable comes with two sensor connectors - VP for direct connection to the sensor and M12 8-pole for connection to sensors with Wi 2G BT Wireless Adapters. The Arc USB Power Cable is not compatible with VisiFerm mA, VisiTrace mA, and VisiPro sensors. -
What is the Arc pH/ORP ECS Adapter Cable?
The Arc pH/ORP ECS Adapter Cable allows Arc pH/ORP sensors to work with traditional transmitters and bioreactor inputs. The cable converts the digital Modbus signal back into millivolts for use with these devices.
-
Connecting Arc Products to Programmable Logic Controllers (PLCs)
Wiring schematics and tips for connecting Arc sensors directly to programmable logic controllers. -
Connecting Arc pH / ORP Sensors to the Bioreactor
There are several methods for connecting Arc pH and ORP sensors to the bioreactor. This article explores your options. -
Wiring for Incyte Arc Cell Density Sensors
There are several wiring options for Incyte Arc sensors depending on the intended goals of the installation. This Knowledge Base article provides a quick guide to wiring this product for each scenario.

We're Ready to Help
Hamilton's sales, customer service, and technical support staff are available for questions and additional information about all products and services.
Contact Us