ODO Cap L1
The ODO Cap L1 is optimized for trace measurement from 1 to 2,000 ppb, stable against active chlorine and chlorine dioxide, and is the replacement ODO Cap for the VisiTrace mA and VisiTrace RS485. Designed for fast response time, lower than 15 ppb measurement.
Found in these product categories:
Part/REF # 10107102
-
Stock status is updated daily. For real-time status, please contact us.
Specifications
| Wetted Parts |
Wetted Parts
Stainless Steel 1.4435
EPDM (Ethylene propylene elastomer) Silicone - FDA 21 CFR 177.2600 VMQ (Silicone elastomer) See compliance details in Material Specification document |
|---|---|
| Surface Quality of Steel |
Surface Quality of Steel
Ra < 0.4 µm (N5)
|
| Serial Number |
Serial Number
Yes
|
| Response Time |
Response Time
t90% < 20 s in gas; < 90 s in water
|
| Autoclavable |
Autoclavable
Yes, max. Temperature 130 °C
|
| Steam Sterilizable |
Steam Sterilizable
Yes, max. Temperature 140 °C
|
| Operating Temperature Range |
Operating Temperature Range
-10 to 140 °C
|
Resources
Documents
-
Brochure
-
Catalogs
-
Certificates
-
Material Specifications
Related Content
- Are there any backwards compatibility limitations with VisiFerm RS485? FAQ
- If I use H0 and H2 caps, why should I upgrade to the VisiFerm RS485? FAQ
- Do I need to use the H3/H4 caps to experience the full benefits of the VisiFerm RS485? FAQ
- Is the lifespan improvement with VisiFerm RS485 valid using H0 and H2 caps? FAQ
- Why should I upgrade my optical DO sensor to VisiFerm RS485? FAQ
We're Ready to Help
Hamilton's sales, customer service, and technical support staff are available for questions and additional information about all products and services.
Contact Us