HC-75
Soft-gel stationary phase designed for oligosaccharide separations using water as the mobile phase.
Application Examples: Applications: Oligosaccharides (degree of polymerization ≤ 8)
-
HC-75 Columns
-
HC-75 Guard Columns
-
HC-75 Bulk Resin
HC-75 Overview
HC-75 resins are soft gel column packings designed for oligosaccharide separations. The mobile phase of these columns is water without salts or buffer. This simplifies mobile phase preparation, reduces cost, and broadens the use of available detectors. Each of these columns has distinct retention characteristics and is designed for specific separations.
How to Choose Column Specifications for Your Application
Tech Center
Spezielle Applikationen
-
Bio Fermented Alcohol Detection Using Isocratic Cation Exchange HPLC (HC-75 H+)
Concern over detrimental greenhouse gases produced from the combustion of fossil fuels has been growing for the past few decades. -
Raffinose Family of Oligosaccharides by Cation Exchange HPLC (HC-75 Ca2+)
A ligand exchange mechanism is explored as a technique to resolve Verbascose, Stachyose, Raffinose, and Melibiose. -
Saccharide Identification in Honey by Cation Exchange HPLC (HC-75 Pb2+)
Is the honey you consume a prime target for adulteration with refined sugars? Read our app note on saccharide identification
Weiterführende Informationen
-
Reference Guide - HPLC Columns
Learn how to choose a column, how to maximize the life of a column through proper care, cleaning, and restoration.
-
How Do I Connect a PEEK Guard Cartridge to My HPLC Column?
The process of connecting a guard cartridge to a HPLC column is straightforward, but requires different steps based on the HPLC instrument and its configuration. Click the headline above to read this step-by-step guide. -
How Do I Connect a Stainless Steel Guard Column to My HPLC Column?
Connecting a guard column to an HPLC column is straightforward, but requires different steps based on the HPLC instrument and its configuration. Click the headline above to read this step-by-step guide.
Work with R&D engineers to customize Hamilton parts
Hamilton's "Custom Built" program puts you directly in contact with a Hamilton R&D Engineer to discuss your application and product needs. The engineer will point you to a standard solution or propose a customized solution to meet your needs.
Talk to an engineer