Polilyte Pro pH- und ORP-Sensoren

General Process pH and ORP sensor manual for EasyFerm, Polilyte Plus, ChemoTrode, FermoTrode, IonoTrode, MecoTrode, Polilyte Pro, Polyplast Pro, Liq-Glass, and EasyControl products.

Material specification of O-ring EPDM

Expected pH sensor lifetime is dependent on the application. Exposure to strong chemicals, elevated temperature, fluctuating pressure, and solid build-up can all impact the sensor life. As the sensor ages, a sluggish response may become more apparent, and will require more frequent calibrations to compensate for this change. The overall health of the Arc pH sensors can be seen using the quality indicator in ArcAir software. Click to learn more about sensor lifespan and expiration in the Knowledgebase article.

A-length refers to the insertion depth of the sensor. It's generally measured from the base of the PG13.5 mounting threads but can vary with certain styles of sensors.

The platinum band around the tip of the ORP sensor can oxidize over time. Light scrubbing with a mild abrasive such as toothpaste will remove the oxidization. Rinse with potable water and store in storage solution prior to usage

Dieser kurze Artikel enthält einige allgemeine Überlegungen zur Installation und Entfernung von Sensoren sowie bewährte Methoden für die Montage.

The ever-changing nature of the electrochemical pH measurement requires that periodic calibration of the sensor is performed. The topic of calibration inevitably creates questions about the frequency and the procedure required to ensure the accuracy of the pH measurement.