The Hamilton ODO Cap S2 Kit is an optical dissolved oxygen sensor cap kit that can be integrated into single-use benchtop reactors.
Product Specifications
| Wetted Parts |
Wetted Parts
PA (Cycloaliphatic polyamide)
EPDM (Ethylene propylene elastomer) VMQ (Silicone elastomer) See compliance details in Material Specification document |
|---|---|
| Measuring Range |
Measuring Range
4 ppb to 25 ppm (DO)
0 to 62.85 %-vol 0 to 300 %-sat |
| Accuracy at 25 °C |
Accuracy at 25 °C
± 1.0 %-sat (at 20 %-sat) after gamma irradiation and with product calibration
± 1.0 %-sat (at 100 %-sat) after gamma irradiation and with product calibration ± 2.5 %-sat (at 200 %-sat) after gamma irradiation and with product calibration |
| Calibration Data |
Calibration Data
Yes, provided on sensor label
|
| Drift at Room Temperature |
Drift at Room Temperature
< 1 % per week (of measurement value)
|
| Biocompatibility |
Biocompatibility
Yes, see separate study report (upon request)
|
| Wet-in Time |
Wet-in Time
30 min after dry storage
|
| Shelf Life |
Shelf Life
12 months prior gamma irradiation
24 months after gamma irradiation |
| Serial Number |
Serial Number
Yes
|
| Response Time |
Response Time
t98% < 30 s at 25 °C
|
| Autoclavable |
Autoclavable
No
|
| Steam Sterilizable |
Steam Sterilizable
No
|
| CIP |
CIP
No
|
| Gamma Irradiatable |
Gamma Irradiatable
Yes, up to 50 kGy
|
| X-Ray irradiatable |
X-Ray irradiatable
Yes, up to 50 kGy
|
| Operating Temperature Range |
Operating Temperature Range
4 to 50 °C
|
Spec. Version D