Polilyte Plus ORP Sensors - Arc
Polilyte Plus ORP Arc sensors have the low maintenance and broad compatibility many applications. All the advantages of the Polilyte Plus family including polymer reference and Single Pore liquid junction to eliminate clogging and poisoning are included. The Polilyte Plus ORP sensors show good measurement accuracy in highly alkaline solutions as well as in samples with low conductivity. Everef-L reference cartridge ensures a long lifetime. Arc technology eliminates the transmitter and communicates directly with your process control system. Both industry standard 4 - 20mA and Modbus output signals are available.
Arc Intelligent Sensor Technology
Polilyte Plus sensors include the option for Arc intelligent sensor technology within the sensor. The video shows how Arc can save considerable time and cost in all phases of your process.
Accessories
Specific Applications
-
App Note - Intelligent Sensors in Pure Water Production
Arc sensors for conductivity, pH and ORP measurement in pure water treatment -
App Note - Arc DO, pH, ORP in wastewater treatment in coking plant
ArcelorMittal, the world's largest steel manufacturer, uses Arc sensors for the effluent treatmentin their coking plant in Ostrava, Czech Republic. -
App Note - Arc DO, pH, Cond in production scale fermentation process
GEA, a global equipment and process technology provider, integrates Arc sensor technology in fermentation plants at their GEA Diessel subsidiary in Hildesheim, Germany.
Resources
-
Catalog - Process Analytics
Download the Process Analytics sensor catalog to learn about the complete offering of Hamilton process sensors and accessories. -
Brochure - BioPharma
Innovative solutions for process analytics in biotechnological and pharmaceutical industries. -
Brochure - Brewery
Learn about our control and analytical solutions that are essential to the brewing process.
-
What solution should I store my pH or ORP probe in?
Hamilton recommends storing pH and ORP probes wet in either Hamilton Storage Solution (Ref 238931) or in 3M KCl solution. Click to see the pH/ ORP Sensor Storage and Regeneration Knowledgebase for more information. -
Which wireless adapter do I need for my sensor?
Hamilton makes two Bluetooth wireless adapters - Wi 1G and Wi 2G. The Wi 1G is designed for VisiFerm sensors using the ECS (nA) signal. The Wi 2G is better choice with Arc sensors. -
How do I clean an ORP sensor?
The platinum band around the tip of the ORP sensor can oxidize over time. Light scrubbing with a mild abrasive such as toothpaste will remove the oxidization. Rinse with potable water and store in storage solution prior to usage
-
Arc Wi Wireless Bluetooth Adapters for probes
There are two versions of the Wi Wireless Bluetooth adapter. This article gets into the selection, wiring, and isolation of these products. -
ArcAir Minimum Sensor Firmware Requirements
This article lists the minimum firmware levels for all Arc sensors to properly work with ArcAir Software. -
Modbus Communication Basics for Arc Intelligent Sensors
This simple primer article discusses the basic setup of Modbus for Arc intelligent sensors and VisiFerm ECS DO sensors.
We're Ready to Help
Hamilton's sales, customer service, and technical support staff are available for questions and additional information about all products and services.
Contact Us