|Measuring Range||Absorbance 880 : 0-2.500; equivalent to 1x10^5 to 7>10^8 cells / mL (mammal) or 0.5 to 100 g/L dry weight|
Stainless Steel 1.4435
EPDM (Ethylene propylene elastomer)
See compliance details in Material Specification document
|Surface Quality of Steel||Ra < 0.8 µm (N6)|
|Optical Path Length||5 mm|
|Steam Sterilizable||Yes, max. Temperature 135 °C|
|Operating Temperature Range||0 to 80 °C|
|Pressure Range bar g||0 to 10 bar (25 °C)|
Specification SheetDencytee Replacement Sensor DN12 - 120
Manual - Cell Density Measuring System (Pre-Amp Version with Arc View Controller)Operating Instructions for the Cell Density Monitoring System for use with Arc View Controllers
Dencytee Cell Density Measurement PrincipleLearn about how Hamilton Dencytee total cell density sensors can continuously measure viable cells.
Understanding Wetted Materials (Stainless, Plastics, & Elastomers)Wetted materials such as stainless steel, plastics, and elastomers are often listed by different names and abbreviations in different parts of the world. This quick cross reference guide helps sort out the common names for wetted materials used in Hamilton sensors.
We're Ready to Help
Hamilton's sales, customer service, and technical support staff are available for questions and additional information about all products and services.Contact Us