DO Adapter
DO Adapter (Ref 242538) is useful for mounting 120 mm oxygen or conductivity sensors, but only for sensors with a shaft diameter of 12 mm throughout the entire a-length. The DO Adapter may not be used for pH sensors or the Conducell UPW. Tightness of the installation after sensor mounting must be verified. The adapter is screwed onto the Hygienic Socket, and the sensor into the adapter. When in place, the sensor tip is almost flush with the Hygienic Socket, leading to excellent cleanability.
Found in these product categories:
Part/REF # 242538
-
$254.00(In Stock)(In Stock)Stock status is updated daily. For real-time status, please contact us.
Specifications
| Process Connection |
Process Connection
PG13,5
|
|---|
Resources
Documents
-
Catalogs
-
Certificates
-
Material Specifications
-
Technical Manuals
Related Products
Accessories
-
Hygienic Socket 1.4404
The Hygienic Socket ideal to weld in fermenters or small pipes. Designed for 120 mm sensors , improve the cleaning process and increase safety. The sensor insertion depth can be varied by using an adapter. -
Hygienic Socket 1.4435
The Hygienic Socket ideal to weld in fermenters or small pipes. Designed for 120 mm sensors , improve the cleaning process and increase safety. The sensor insertion depth can be varied by using an adapter. -
Hygienic Socket 1.4571
The Hygienic Socket ideal to weld in fermenters or small pipes. Designed for 120 mm sensors , improve the cleaning process and increase safety. The sensor insertion depth can be varied by using an adapter. -
Hygienic Socket 2.4602
The Hygienic Socket ideal to weld in fermenters or small pipes. Designed for 120 mm sensors , improve the cleaning process and increase safety. The sensor insertion depth can be varied by using an adapter.
We're Ready to Help
Hamilton's sales, customer service, and technical support staff are available for questions and additional information about all products and services.
Contact Us