Material Specification - Declaration of Compliance with the Order EN 10204-2.1
In this section it is possible to download the Hamilton Declaration of Compliance with the Order EN 10204-2.1. Those are material specifications showing that the materials of the wetted parts fulfill, i.e. surface quality, USP class VI tests, etc.
Please note that some products like VisiFerm DO, VisiPro DO, OxyFerm FDA and OxyGold B and G consist of a sensor body and a membrane / cap. Due to the fact that the membranes / caps can be changed the material specifications of sensor body and membrane / cap are separated. As a consequence for these products both specifications are required.
Dissolved Oxygen Sensors and Spare Parts
-
Material Specification - ODO Caps H0, H2, H3, and H4
Material Specification for ODO Caps H0, H2, H3, and H4
-
Material Specification - OxyFerm FDA Sensors
Material specifications for OxyFerm FDA sensors
-
Material Specification - ODO Caps S0, S2 and S3
Material Specification for ODO Caps S0, S2 and S3
-
Material Specification - OxyGold Optiflow Membranes
Material specifications for the OxyGold Optiflow Membranes
-
Material Specification - OxyFerm Optiflow Membranes
Material specifications for OxyFerm Optiflow membranes
-
Material Specification - OxyFerm XL
Material specifications for the OxyFerm XL.
-
Material Specification - OxyGold B and G Sensors
Material specifications for the OxyGold B and G sensors.
-
Material Specification - VisiFerm and VisiPro Sensors
Material Specification for VisiFerm and VisiPro Sensors
Dissolved CO₂ Sensors
-
Material Specification - CO₂NTROL RS485 Sensors
Material Specification for CO₂NTROL RS485 Sensors
Conductivity Sensors
-
Material Specification - Conducell UPW Sensors
Material specification for Conducell UPW sensors.
-
Material Specification - Conducell 4UxF Sensors
Material specification for Conducell 4UxF sensors.
-
Material Specification - Conducell 4US Sensors
Material specification for Conducell 4US sensors.
-
Material Specification - Conducell I Sensors
Material specification for Conducell I sensors
Cell Density Sensors and Units
-
Material Specification - Incyte Cell Density Sensors (Arc and Pre-amp Versions)
Material specification for Incyte sensors and units (both Incyte Arc and Pre-amp products)
Housings
-
Material Specification - RetractoFit Bio
Material specification for the RetractoFit Bio.
-
Material Specification - Retractex C Plastic and Plastic LT
Material specifications for the Retractex C Plastic and Plastic LT.
-
Material Specification - FlexiFit
Material specification for FlexiFit.
-
Material Specification - MasterFit
Material specification for MasterFit.
-
Material Specification - Retractex B
Material specification for Retractex B
-
Material Specification - Retractex C Steel and Steel LT
Material specifications for Retractex C Steel and Steel LT.
-
Material Specification - RetractoFit and RetractoFit PEEK
Material specifications for RetractoFit and RetractoFit PEEK.
Flow Cells
-
Material Specification - FlexiFlow SL 10
Material specification for FlexiFlow SL 10.
-
Material Specification - Flow Cell
Material specification for the Flow Cell.
Sockets and Blind Plugs
-
Material Specification - Safety Socket and Blind Plug
Material specification for the Safety Socket and Blind Plug.
-
Material Specification - Hygienic Socket
Material specification for the Hygienic Socket.
O-rings
-
Material Specification - O-ring Silicone
Material specification of O-ring Silicone
-
Material Specification - O-ring EPDM
Material specification of O-ring EPDM
-
Material Specification - O-ring FFKM (Kalrez)
Material Specification for FFKM O-ring seals