Silica Packings

Hamilton HxSil C8 and C18 columns exhibit greater retention than most columns. This allows the separation of compounds that are not sufficiently retained on other C8 or C18 columns.

HxSil C8


Hamilton HxSil C8 columns are well end-capped for retention time reproducibility and durability. The C8 demonstrates excellent selectivity needed for complex sample mixtures and gives shorter retention times than a C18.
HxSil C18


Hamilton HxSil C18 columns are well end-capped for retention time reproducibility and durability. HxSil C18 columns exhibit greater retention than most columns and enhances the separation of compounds that are not sufficiently retained on other C18 columns.
Roll the cursor over the menu headers below to see the available selections. Filter by one or more items in any order to narrow your search down to a single part number in this category. Reset a filter by clicking the red X that appears next to a filtered item. For more detail on any menu item, click the question mark on the right-hand side of the menu bar.

              Part Number
              Description
              Unit Price
              Quantity

              Compound Class

              General, chemical type or category of compound to be separated.

              Packing Material

              The type of resin that is packed inside the column tube.

              USP Class

              United States Pharmacopeia HPLC column designation.

              Particle Size

              Size (in micrometers) of the polymer or silica bead packed inside the column tube.

              Hardware ID

              Inside diameter (in millimeters) of the column tube.

              Hardware Length

              Length of the column tube (in millimeters).

              Hamilton HxSil C18 columns exhibit greater retention than most columns. This allows the separation of compounds that are not sufficiently retained on other C18 columns. Figures 1 and 2 illustrate the separation of polycyclic aromatic hydrocarbons (PAH’s) on an HxSil C18 column versus a Nova-Pak® C18 column of the same length. The flow rate has been reduced for the Nova-Pak C18 column to compensate for the smaller I.D. The Hamilton HxSil C18 column provides about twice the retention for these compounds (23 minute run time versus 11 minutes). The greater retention of the HxSil C18 column provides better separation of these PAH compounds.  With the HxSil C18 column, peaks 2 through 6 (naphthalene, acenaphthylene, acenaphthene, phenanthrene, anthracene) are baseline resolved. The Nova-Pak C18 column does not fully separate peaks 2 and 3; peaks 5 and 6 are only partially resolved. Peaks 9 and 10 are better separated on the Hamilton HxSil C18 column.

               


              Silica-based columns for general separations

              - Separation of closely related PAH'sBetter retention of poorly retained compounds
              - Separation of neutral, acidic and basic compounds without tailing (tailing factor of less than 2.0).

              Product Features

              - Two particle sizes: 3 and 5 µm.Five column internal diameters: 2.1 to 21.5 mm.
              - Analytical and semiprep/preparative guard columns in 316 stainless steel.




                

              Custom Column Sizes

              Part Number
              Description
              Unit Price
              Quantity
              Semipreparative HPLC Column, CUSTOM ORDER (7.0, 7.8, 10 mm ID)
              1995.00
              Buy Now!
              Preparative HPLC Column #1, CUSTOM ORDER (21.2, 30 mm ID)
              3780.00
              Buy Now!
              Preparative HPLC Column #2, CUSTOM ORDER (50 mm ID)
              RFQ
              Buy Now!
              Preparative HPLC Column #3, CUSTOM ORDER (100 mm ID)
              RFQ
              Buy Now!
              Analytical HPLC Column [single], CUSTOM ORDER (1.0, 2.1, 4.1, 4.6 mm ID)
              805.00
              Buy Now!


              Website Feedback   |    Terms of Use   |    Privacy Policy   |    Partner Portal
              © 2013 Hamilton Company. All rights reserved. Hamilton Company, product and/or service names referenced are either trademarks or
              registered trademarks of Hamilton Company or its licensors in the U.S. and/or other countries. For details, visit www.hamiltoncompany.com/trademarks.

              For Sales and Product information, contact your local Hamilton Sales Office at (800) 648-5950.