Hamilton Company | Hamilton Diluters | Dual Syringe Liquid Handler

Dual Syringe Liquid Handler

The Dual Syringe Liquid Handler has two syringe drives and two valve positioners. This pump is designed for labs that require ultimate flexibility from their equipment. Configurable valve and syringe mounts enable attachment of all ML500 and PSD/2 valves. A quick change of the valves and syringes converts the Liquid Handler from diluting to dispensing and much more.

Sub Categories
Products
Detailed Description
Downloads and Links

PC Controlled System
	The MICROLAB 500C instruments perform the same functions as the 500B series except that programming and method storage is performed using a PC and RS232C communication. The computer controls the MICROLAB 500C instrument based on the method selected or one that has been pre-programmed into the instrument's EEPROM (Electronically Erasable Programmable Read-Only Memory). Up to 16 instruments can be daisy-chained and controlled from the host computer.

The dual syringe liquid handler can fit syringes from 25 µL to 25 mL. For the greatest accuracy and precision it is recommended to operate syringes above 10% of their nominal volume (for example 2.5 µL from a 25 µL syringe). If lower volumes are desired the ML500 is capable of dispenses down to 0.1% of nominal syringe volume with a modest decrease in accuracy and precision.

Controller Options:

PC Controlled System - The ML500 is controlled with software written for the PC. This option provides the most programming options but requires a tethered PC.

Catalog

ML500 Pumps and Accessories

Instructions

IQ, OQ, PQ

Datasheets

ML560 Data Sheet

+ |